Page 1 of 1
Global Color settings for Parts
Posted: Fri Apr 29, 2022 4:50 pm
by -Tom-Tom-
Global Color settings for Parts
At the moment, chip resistors have a green body. If I would like all my resistors black, I have to change each one separately. If you have a large PCB with a lot of it…
Re: Global Color settings for Parts
Posted: Fri Apr 29, 2022 10:57 pm
by Zofz
If the BOM file is loaded and columns are recognized, you have additional options to copy the component model across the board.
- copy to all the same footprints, and
- copy to component identically named
This could be a workaround.
Another topic:
I discovered that the bigger the company, the longer the footprint names.
(and the names for the same thing differ.)
Re: Global Color settings for Parts
Posted: Tue May 03, 2022 6:37 pm
by -Tom-Tom-
Well, i cant find this buttons ... maybe it's because I'm using eagle + *.upl for export?
- no_equal.JPG (47.87 KiB) Viewed 9668 times
Re: Global Color settings for Parts
Posted: Wed May 04, 2022 4:40 pm
by Zofz
ZofzPCB expects to get a BOM file in text, comma-separated values (.csv) file, together with gerbers.
It recognizes the format - the separator character, summary or one component per line, and the order of columns.
You can check the result in the Components List as you do.